Use a Plunger
When faced with a clogged toilet that has poop in it, using a plunger is often the first line of defense. This tried and true tool can effectively remove the blockage and get your toilet back to its normal functioning state.
To successfully unclog a toilet with poop in it using a plunger, follow these steps:
- Prepare the plunger: Before starting the unclogging process, ensure that you have a plunger specifically designed for toilets. These plungers have a bell-shaped end that fits snugly into the toilet drain. You may also want to consider wearing gloves and protective clothing for hygienic purposes.
- Add water: If the water level in the toilet bowl is low, add some water until it reaches a suitable level. The added water will help create a better seal when using the plunger, enhancing its effectiveness.
- Position the plunger: Place the plunger into the bowl, ensuring that the bell-shaped end covers the drain opening completely. Make sure there is a tight seal formed between the plunger and the toilet bowl surface.
- Apply pressure: Once the plunger is properly positioned, gently push and pull the plunger handle up and down. This rhythmic motion creates suction that dislodges the clog. Maintain a steady pace, gradually increasing the intensity of your plunging. Be careful not to use excessive force as it may cause water to splash out of the bowl.
- Continue plunging: Repeat the plunging motion for several minutes or until you feel the blockage giving way. Sometimes, it may require multiple attempts to completely clear the clog. Patience and persistence are key.
- Flush the toilet: Once the clog is loosened or completely removed, flush the toilet to see if the water drains properly. If the water recedes normally and the toilet flushes as it should, congratulations! You have successfully unclogged your toilet with the power of a plunger.
Remember, using a plunger is a simple and effective method to unclog a toilet with poop in it. By following these steps and maintaining a steady rhythm, you can create the necessary suction to dislodge the clog and restore your toilet to full functionality.
Try a Toilet Auger
If the previous methods fail to unclog the toilet, a toilet auger can be a helpful tool to clear the blockage. A toilet auger, also known as a plumbing snake or a closet auger, is a long, flexible tool specifically designed to reach and remove clogs in a toilet’s plumbing system. It consists of a coiled metal cable with a handle at one end and a corkscrew-like tip at the other.
Using a toilet auger may seem intimidating, but with some simple guidelines, you can effectively retrieve the obstruction and restore proper flushing. Follow these step-by-step instructions on how to properly use a toilet auger:
Step 1: First, ensure you have access to a toilet auger. You can find toilet augers at most hardware stores or online. It’s essential to use a toilet-specific auger rather than a drain auger, as the latter might damage the porcelain of your toilet.
Step 2: Put on gloves and protective eyewear as a precautionary measure, especially if dealing with a potentially messy situation.
Step 3: Before inserting the auger, make sure the toilet bowl is filled with enough water to cover the tip of the auger. This water helps lubricate the cable and allows for smoother movement.
Step 4: Carefully insert the auger’s corkscrew tip into the toilet bowl, ensuring it goes beyond the U-bend and into the drainage pipe. Gently push the cable down until you feel resistance, indicating the presence of the clog.
Step 5: Once you reach the clog, start rotating the handle clockwise. The auger’s corkscrew tip will gradually break through the blockage or entangle it, making it easier to pull out. Maintain a steady but gentle pressure, avoiding excessive force that could damage the toilet.
Step 6: As you turn the handle, slowly retract the cable. Keep rotating while pulling back to ensure the clog is thoroughly dislodged. If you encounter any resistance or the cable becomes difficult to pull back, it’s possible that the obstruction has hooked onto the corkscrew tip. In such cases, continue rotating while gently tugging until the clog is free.
Step 7: Once the auger is successfully removed, cautiously dispose of any waste material that may have attached to it. It’s essential to clean and disinfect the auger thoroughly before storing it.
Step 8: The final step is to flush the toilet to check if the clog has been cleared successfully. If the water drains without any obstruction, congratulations on resolving the issue using a toilet auger!
Remember, using a toilet auger requires patience and care. If you find the process challenging or the clog persists despite your efforts, it may be wise to seek professional assistance from a plumber to avoid potential damage or further complications.
By following these instructions and utilizing a toilet auger correctly, you can tackle even the toughest toilet clogs with confidence and get your bathroom back to normal functioning.
